Automatic Multiple-Marks Contour-cut Vinyl cutter
*Advanced circuit board and ARMS chipsets that allow steady and perfect performance.
*Drive: Step motor.
*Strong structure of machine and floor stand.
*Steel axis makes pinch roller tightly grasp vinyl, even in very high glossy.
*Linear guide cutting head and each part inside cutting head is metal-made.
*Improved Double media holders that can vinyl rolls move smoothly.
*Media basket is equipped with each machine stand.
*Personalized design; easy to operate.
*It works with most famous software in HPGL, such as Signmaster, Flexi, Coreldraw,and etc.
*Automatic laser eye for contour cut with Multiple Marks Setting.
(Can cut contour with multiple mark in Coreldraw through Pro Sign II Plug-in)
|Model||HBC -720II / HBC -870II / HBC-1350II|
|Max. Feeding Width||740 mm / 870mm/ 1340 mm|
|Max. Cutting Width||630 mm / 780mm/ 1260 mm|
|Cutting Speed||0 - 1200 mm/s|
|Cutting Pressure||1 – 500 g|
|LCD Display||Back-lit LCD|
|Interface||RS232 Serial Port/ USB 2.0/ USB Flash disk|
|Floor Stand||Heavy duty Iron stand with professional Media Basket|
|Power Requirement||AC110V±10% or AC220V±10%|
|Command Set||HPGL / DMPL|
|Working Temperature Range||5 ~ 40 °C|
|Working Humidity Range||5% ~ 65% (without condensation)|
Note: The above parameters are subject to change without prior notice.
Machine body (mounted with Motherboard; port board; Power supply; motors; and etc)
Pinch holder 3pcs;
Metal carriage (with Automatic laser eye);
Blades (3pcs Roland Type);
Pen & pen holder;
Strong iron-made Floor stand;