No matter what kind of work you do, safety is first and foremost. The operation of laser cutting machine is the same. We should pay attention to many matters when using the machine. Only by paying attention to these matters can we avoid many unnecessary troubles and potential dangers. What are the precautions for laser cutting machine operation?
1、 Observe the general safety operation procedures of cutting machine. Start the laser in strict accordance with the laser start-up procedure.
2、 Wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam.
3、 The operator shall be trained, familiar with the structure and performance of the equipment, and master the relevant knowledge of the operating system.
4、 When the equipment is started, the operator shall not leave the post or be entrusted to be managed without permission. If it is really necessary to leave, the operator shall shut down or cut off the power switch.
5、 Do not process a material before it is known whether it can be irradiated or heated by laser, so as to avoid the potential danger of smoke and steam.
6、 Put the fire extinguisher in the accessible place; turn off the laser or shutter when not processing; do not place paper, cloth or other inflammables near the unprotected laser beam.
7、 In case of any abnormality during the processing, the machine shall be shut down immediately, and the fault shall be eliminated or reported to the supervisor in time.
8、 Keep the laser, bed and surrounding areas clean, orderly and free of oil pollution, and stack the workpieces, plates and wastes as required.