CNC is the English abbreviation for Computer numerical control. CNC engraving machine is also called CNC engraving machine, which is a precision numerical control equipment.
With the development of the engraving industry, the market has put forward higher requirements for engraving machine manufacturers. The market segmentation of the engraving industry has become increasingly mature. CNC engraving meets the needs of large-scale production, and the operation interface is also more concise.
The main function
Can be applied to a variety of flat materials for cutting, 2D engraving, 3D engraving. The main functions and advantages of the multi-functional metal plaque engraving machine: powerful, multi-purpose, whether it is the production of bronze, stainless steel, titanium, aluminum and other metal surface lettering, engraving and art graphic crafts, etc. Get it done. Thanks to the machine's powerful engraving function, it can be processed from large-format signs to tiny badges and nameplates.
The engraving machine is a precision numerical control equipment, and the necessary daily maintenance and maintenance is essential to the service life and accuracy of the machine.
1. The continuous running time is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.
Second, each time the machine is used, it is necessary to pay attention to cleaning. It is necessary to clean the dust on the platform and the transmission system, and regularly and weekly (weekly) lubricate the transmission system (X, Y, Z three axes). (Note: X, Y, Z three-axis polished rods are maintained with oil; high-speed butter is added to the screw; in winter, if the working environment temperature is too low, the screw, polished rod (square rail or circular guide) should be cleaned with gasoline first. Then add the oil, otherwise it will cause the resistance of the machine transmission part to be too large and cause the machine to be misplaced.) Third, the maintenance inspection of the electrical appliance is, the power must be cut off, until the monitor has no display and the main circuit power indicator is extinguished. get on