Maintenance of woodworking CNC engraving machine

- Sep 13, 2018-

How to determine the engraving precision of woodworking CNC engraving machine:

First, check the plane machining accuracy of CNC woodworking engraving machine. There is such an easy way to try it out. Use the programming software to make a larger rectangle. Use a ruler to measure whether the diagonal of the rectangle is consistent. If the plane accuracy of the consistent machine is ok, the machine accuracy will not be reached.

Secondly, check the precision of the relief machining of CNC woodworking engraving machine. The line spacing is set smaller and layered. After doing a good job, look at whether the four sides of the machine are smooth and the embossed layer connection is smooth. If the four sides are jagged and not smooth, the X-axis of the machine has an accuracy error. If the relief has a fault or a step, the Z-axis of the machine has an accuracy error.

Ways to improve the working efficiency of woodworking CNC engraving machine:

1, according to different materials to determine the different amount of knife

Since the cutters of different materials will have a maximum amount of knives, when we use the woodworking engraving machine to process, try not to use the maximum knives of the knives for processing. For long time processing, the cutters are damaged faster.

2, according to the thickness of the engraving material to determine the depth of the knife

We have to carry out roughing according to the actual situation and then carry out finishing. When roughing, remove all the remaining amount as much as possible to save the finishing time.

Maintenance of woodworking CNC engraving machine:

1. Check if the CNC woodworking engraving machine line is loose during a certain period of time;

2. Do not place sundries (with magnetic materials, overweight items, liquids) on the countertop or head of the CNC woodworking machine;

3, do not let the machine work in the same corner of the CNC woodworking machine table (in case the screw rod, guide rail is not in contact with the beam for a long time and can not be properly lubricated);

4, CNC woodworking engraving machine should be placed in a dry and ventilated place (to prevent exposure);

5. The CNC woodworking engraving machine must be equipped with a reliable voltage regulator to ensure the grounding of the grounding wire.